|
Directional characteristics: |
Supercardioid |
|
Principle of operation: |
Pressure gradient |
|
Cartridge type: |
Pre-polarized condenser element with vertical diaphragm |
|
Frequency range: |
20 Hz to 20 kHz |
|
Frequency range, ± 2 dB, 20 cm (7.9 in) distance: |
80 Hz to 15 kHz with 2 dB soft boost at 10 to 12 kHz |
|
Sensitivity, nominal, ±3 dB at 1 kHz: |
6 mV/Pa; -44 dB re. 1 V/Pa |
|
Equivalent noise level, A-weighted: |
Typ. 23 dB(A) re. 20 μPa (max. 26 dB(A)) |
|
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): |
71 dB |
|
Total Harmonic Distortion (THD): |
< 1 % up to 123 dB SPL peak, < 1 % up to 120 dB SPL RMS sine |
|
Dynamic range: |
100 dB |
|
Max. SPL, peak before clipping: |
142 dB |
|
Output impedance: |
From MicroDot: 30 to 40 ohm; from DAD6001-BC: 100 ohm |
|
Cable drive capability: |
300m (984 ft) with DAD6001-BC XLR adapter |
|
Output balance principle: |
Signal balanced with DAD6001-BC XLR adapter |
|
Common Mode Rejection Ration (CMRR): |
> 60 dB at 50 Hz to 15 kHz with DAD6001-BC XLR adapter |
|
Power supply (for full performance): |
Min. 5 V to max. 50 V through DPA adapter for wireless systems; 48 V phantom power ± 4 V with DAD6001-BC XLR adapter |
|
Current consumption: |
1.5 mA (microphone); 3.5 mA with DAD6001-BC XLR adapter |
|
Connector: |
MicroDot |
|
Color: |
Black |
|
Weight: |
10 g (0.35 oz) |
|
Capsule diameter: |
5.4 mm (0.2 inch) |
|
Cable length: |
2 mm (6.6 ft) |
|
Polarity: |
Positively increasing sound pressure produces positive going voltage on MicroDot pin (and pin 2 on DAD6001-BC XLR adapter) |
|
Operating temperature range: |
-40 °C to 45 °C (-40 °F to 113 °F) |
|
Operating relative humidity: |
Up to 90 % |
현재위치 : 
레코딩용 초소형 마이크
